Howe Truss Bridge

By on June 11, 2007 -- Modified on October 5, 2016

Have you wanted to make a strong popsicle stick bridge that used 100 popsicle sticks or less? This popsicle bridge was made from 98 unmodified popsicle sticks and WeldBond glue. It was 21 inches long, 4 inches tall, and 4 inches wide. It weighed about 150 grams, and held 140 pounds. With less than 100 popsicle sticks, that is a lot of strength in this bridge. Its efficiency score was 424.

This is the strongest popsicle bridge I have built so far.

I tested this bridge by putting the edges of the bridge on two books, and then placing a scale on the top of the bridge. Then I slowly lowered myself down on the scale with the help of two chairs. I carefully watched the scale to mark the exact spot of failure.

Before this bridge broke, I did hear several loud “popping” noises. This means several popsicle sticks came unglued. I probably could have stopped testing and re-glued those popsicle sticks. Had I done that, the bridge might have been able to hold even more.

That is the value of pre-testing your bridge. Evidently, a couple popsicle sticks weren’t glued on well enough, at least not as well as the others. That means I had several “weak links” that limit the strength of the bridge. Pre-testing allows you to identify those weak spots and fix them, without completely destroying your bridge.

Purchase Blueprints for this Bridge

Related Posts:

Post Information

32 thoughts on “Howe Truss Bridge”

1 2
  1. is it possible to make 12 inches high and 6 inches deep

    By skyler -- December 6, 2016
  2. We’re doing this in science and I needed an idea of what to build!!

    By Maddison Harris -- December 1, 2016
  3. Cool bridge! Using it for a project.

    By bobjoe -- December 7, 2014
  4. These bridges are so cool thanks for posting them on this website

    By austin -- April 7, 2010
1 2

Leave a Reply to Maddison Harris Cancel reply

Your email address will not be published. Required fields are marked *


59 queries in 0.423 seconds.