Hi, I just wanted to share the excitement…by using ideas from your website (recommended by my son’s Cub Scout leader) my son Jackson and I were able to build a Popsicle bridge with approximately 125 sticks. It set a new record by holding 500 lbs. for about 15 seconds before breaking! Thanks for the great ideas…not bad for the first try
This is a popsicle stick bridge I built while in the last few weeks of my fall college semester. I used 924 popsicle sticks to build this bridge. This bridge was 5 feet long, 10 inches tall, and 8 inches wide. I had to sort through 2600 popsicle sticks to find enough usable ones. The first testing of the bridge consisted of 220 pounds worth of weights. The second testing included putting a piece of plywood on top of the bridge and me standing on it (170 pounds). We noticed that one end diagonal chord was bending tremendously, so I decided to call off any more testing until I could repair that one piece
These are the photos of a popsicle bridge that I made for a bridge building contest at my university in Spain. The weight of the bridge was 3.9kg, and the bridge held 700kg without breaking. This gives it an efficiency score of 180. The dimensions of underneath the arc are 90cm x 45cm.
Have you wanted to make a strong popsicle stick bridge that used 100 popsicle sticks or less? This popsicle bridge was made from 98 unmodified popsicle sticks and WeldBond glue. It was 21 inches long, 4 inches tall, and 4 inches wide. It weighed about 150 grams, and held 140 pounds. With less than 100 … Read more Howe Truss Bridge
This popsicle bridge was made from 58 unmodified popsicle sticks. It was 25 inches long, 4 inches tall, and 3 inches wide. I used only Elmer’s white glue to build the bridge. It weighed 86.5 grams, and held 45 pounds. Its efficiency score was 248. Build This Bridge I redesigned this bridge from the earlier … Read more Popsicle Bridge #2
I have a bridge I built for a physics for engineers class I’m taking in cegep (QUEBEC). My partner and I didn’t have much confidence in it, but it blew the competition away! We primarily focused on keeping the weight of the bridge down. The bridge weighed in at 211 grams.
This popsicle stick bridge was made from 40, unmodified popsicle sticks. The bridge spanned 12 inches, was 4 inches tall and 3 inches wide. I used only Elmer’s white glue to build the bridge. It weighed 57.4 grams (0.13 pounds), and held 90 pounds. Its efficiency score was 712.