The type of joint you use on your bridge can drastically change its strength. There are three basic types of joints, the Lap Joint, End Joint, and Notched Joint. To increase the strength of an end or notched joint you can add a Gusset. Learn about each type of joint and when to use it on a model bridge in this article.
These pictures are not of glued joints, I simply laid sticks together. On a bridge, you want to make sure that the joints are clean and there are no gaps between the wood. Glue does not work well as a filler, the two pieces of wood should have no gaps.
Lap Joint:
The lap joint is one of the strongest, and you should use it whenever you can. It helps members in compression to resist bending. The lap joint has a potential weakness, however. Depending on the type of glue you use, the joint is only as strong as the face of the wood. If your glue soaks into the wood then this will not be a problem. The face of Balsa wood is typically not strong, and tears easily. You can also help avoid tearing by making sure your lap joints have plenty of surface area for the glue.
Yo this is hectic, the bridges go crazy, i use won of does crazy notched joints and the big boy held. I mean WOW it really held. Thanyou so much gart for the information, My joints are stringer then every, 9/5 goes crazy, would build bridge again.
Hi friends, what type of joint is widely applied in bridge contruction?
do lap joints work on the sides of bridges?
/
Yes they do.
Hi, I have to make a popsicle stick bridge for my physics class, what is the strongest way to make a joint for an I-beam? We are not allowed to overlap the sticks. Thanks.
use gussets
This is not good i cant find a illustration and a double gusset
I’m writing a speech on our bridge that we did, and I was wondering why are double gussets the strongest bridge joints?
because the gussets hokd the stick to the other stick and keep it in place
For one of my engineering classes, we are currently building a bridge. We are allowed to use only 15 sticks of 3/23 x 3/32 x 24 inch basswood. The bridge cannot be less than 14 inches long or more than 16 inches wide. The main challenge is that the center of the bridge must allow a ¾ inch rod to pass through the center top of the bridge extending downward to the bridge deck. In addition, the continuous interior width of the structure must allow a 2 inch by 2 inch by 18 in clearance test block to pass through without obstruction from end to end. This ¾ inch loading rod will press down on the bridge deck testing block.
I am thinking of designing a Pratt Truss. I have no experience in making bridges whatsoever, but I do love calculating joint member forces and etc. Any tips that can help me go in the right direction? Anything about designing the Pratt Truss and building it would be greatly appreciated.
(one addition note: the sticks can be laminated, with two or more pieces glued together with the wood grain parallel. However, lamination may not exceed two pieces.)
Hello fellow GSMST student.
I wonder how many of us are using this as a source.
Quite a few I believe.
I am doing a project in my class and this has helped me so much! I plan to come here whenever I have a project related to bridges!!!!
What type of bridge won for y’all? We have to do one with balsa wood this year and I’m trying not to fail
Thanks for this info. Now i can make a fantastic bridge for my technology project. Thanks again Garrett!!!
Hi Garrett!
For our physics class, we are required to make a balsa wood bridge. It’s a competition, and the bridge with the HIGHEST EFFICIENCY get a 100 as a test grade and the grades decrease as efficiency decreases. We have requirements: we may only use 15 pieces of balsa wood (2ft in length, 1/8 inch in width), and 2/3oz of wood glue. No other materials may be used. The bridge itself must also be between 10 and 12″ in length, be 2.25-3.23″ in width, and be less than 4″ high. We mus have a roadbed of 10-12″ in length, 2-3″ in width, and at least 2″ high. We can also have an optional underhang, 7″ or less in length, 2.25-3.25″ wide and less than .75″ in height. we are allowed to notch, miter, butt the wood and pieces on top of each other (not less than a 30* angle though). We are NOT allowed to split like a Y shape or laminate the wood with glue. We are allowed to use King Post trusses, lattice trusses, Pratt trusses, William Howe trusses, James Warren trusses, Squire Whipple trusses, Albert Fink trusses, and K-trusses. Any recommendations on how to scale what you had made down a few inches (but still have the same or close to the same efficiency) or make anything within these previously listed requirements with ample efficiency? Thanks so much! 🙂
Are you given wood to use or do you have to buy it on your own? The good news is that the shorter the bridge, the easier it is to get a high efficiency. I personally prefer the Pratt truss design.
We are given the wood.
How can I scale down the Fernbank Project-style bridge?
It would be hard for you to build the Fernbank Project bridge. What made that bridge highly efficient was the use of T and L Beams, which are not allowed if I understand your rules correctly. Balsa wood can be tricky, as it is very inconsistent. Don’t think that you have to use all the wood, as it sounds like you do not have a minimum weight to hold. The lighter your bridge, the less it has to support to get a high efficiency. Pick out the best wood.
I would recommend that you double your truss members by putting them on the inside as well as on the outside of your top and bottom chords.
Also, if it is allowed, you might want to consider mixing a little water with your wood glue. I know it sounds weird, but it can actually strengthen your joints by thinning the glue just a little bit. Thinner glue can penetrate into the wood better. I’ve heard that a 30% water 70% glue mix works well.
Make sure you have adequate lateral bracing and that your bridge is built so that it is perfectly vertical, and the sides are parallel to each other.
Balsa bridges tend to break for two reasons, a member in compression fails, or the joints pull out. Typically the face of balsa wood is not very strong, which is why you want your glue to go deep into the wood.
How do you know?